CDVTJ - U-20 PART B

  • MSDS: CDVTJ
  • Manufacturer: WESTPAC PRODUCTS CO INC
  • Product Name: U-20 PART B
  • National Stock Number: 5610-01-281-9741
Product Identification

Product ID:U-20 PART B
MSDS Date:04/14/1987
FSC:5610
NIIN:01-281-9741
Kit Part:Y
MSDS Number: CDVTJ

Responsible Party
WESTPAC PRODUCTS CO INC
106 HEGENBERGER LOOP
OAKLAND, CA 94621
US

Emergency Phone: 415-632-3778

Info Phone: 415-632-3778

Cage: 4Z694

Contractor
WESTPAC PRODUCTS CO INC
OAKLAND, CA 94621-1326 US

Cage: 4Z694

Ingredients

MODIFIED ALIPHATIC AMINES

Fraction By Weight: 100.0%

Hazards

LD50 LC50 Mixture:LD50 4500 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: IRRIT. SKIN: IRRIT, DERMATITIS.

First Aid

First Aid:SKIN: WASH W/SOAP & WATER. EYE: FLUSH W/WATER FOR 15 MIN AND
CALL MD. WASH CLOTHES BEFORE REUSE.

Fire Fighting

Flash Point:306F,152C CC
Lower Limits:NE
Upper Limits:NE
Extinguishing Media:DRY CHEMICAL, CO2, FOAM
Fire Fighting Procedures:USE SCBA
Unusual Fire/Explosion Hazard:AVOID HEAT, OPEN FLAME, & ELECTRICAL
SPARKS

Accidental Release

Spill Release Procedures:ABSORB W/INERT MATERIAL. PUT IN DISPOSAL
CONTAINER. FLUSH AREA W/WATER.

Handling

Handling and Storage Precautions:AVOID SKIN & EYE CONTACT & BREATHING
VAPORS. LABEL ALL CONTAINERS TO PREVENT INGEST.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATORY PROTECTION IN
CONFINED AREAS.
Ventilation:LOCAL EXHAUST PREFFERED. MECHANICAL ACCEPTABLE.
Protective Gloves:YES
Eye Protection:SPLASH PROOF GOGGLES
Other Protective Equipment:ADEQUATE SKIN PROTECTION.
Supplemental Safety and Health
NK

Chemical Properties

Boiling Pt:B.P. Text:392F,200C
Vapor Pres:NA
Vapor Density:1.0
Spec Gravity:1.03
Evaporation Rate & Reference:<1(BUTYL ACETATE)
Solubility in Water:MISCIBLE
Appearance and Odor:CLEAR AMBER, SLIGHT AMINE ODOR
Percent Volatiles by Volume:NIL

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, EPOXY RESINS
Conditions to Avoid Polymerization:STRONG ACIDS & EPOXY RESINS IN
UNCONTROLLED AMOUNTS

Disposal

Waste Disposal Methods:INCINERATE OR BURY IN LANDFILL IN ACCORDANCE
W/FEDERAL, STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.